Installing sandstone pavers for a walkway, driveway, or patio is a cost-effective and attractive method to enhance your house. While alternative materials such as asphalt or granite can be used for your driveway, sandstone pavers require less care, are more durable, and are also extremely environmentally friendly.
Sandstone paving is a fantastic choice for outdoor projects such as patio gardens, driveways, and street pavement. It’s also perfect for indoor spaces like restrooms and hallways in homes and offices. Sandstone tiles are appropriate for rainy locations because they dry rapidly and are non-slip due to their water absorption. Sandstone paving differs from other types in appearance, giving each one a distinct and individual aspect.
Sandstone is a hard, heavy natural stone that has long been used in architecture. Sandstone is commonly used in landscaping. If you want to use sandstone paving slabs outside, you can do so in the following areas:
These benefits, however, are only available if your pavers are installed appropriately. Here are five installation ideas for sandstone pavers to give you a better idea:
1- Think about the soil type.
Outdoor pavers are not suitable for all soil types. Before you start laying down your bricks, make sure the soil is stable enough to handle the weight of the bricks as well as any additional loads such as people, furniture, or automobiles. Clay soil is inappropriate for pavers because it shifts with weight, necessitating further stabilization work.
The type of soil base you’ll require is also determined by the intended function of the paved surface. Increased substantial soil bases, such as crushed stone or recycled concrete aggregate, are required for surfaces that will be subjected to more weight, such as a driveway.
2- Make sure your sand bedding is compacted.
Your pavers are held together by your sand bedding. To create the friction that keeps the pavers in place, the sand must be compressed. The stability of the substrate, or base, is essential for ensuring that the sandstone pavers on top do not shift easily owing to weight or ground movement.
Heavy machinery is frequently used to compact the soil. A contractor, on the other hand, can use a little compactor for smaller work like your walkway or driveway.
3- Don’t overlook drainage.
Your structure will be saturated and eventually compromised unless the water is channeled away from it through appropriate drainage. This holds for every human-made structure, be it a skyscraper or a small driveway paving work!
In most cases, the drainage system can be as basic as a 1-2″ slope to keep water from collecting beneath your pavers. This can be done during the soil compaction process when you tamp down the substrate and shape it to route the water elsewhere.
4- Maintain your composure
It’s ultimately up to you how you arrange your bricks, but using paver edging to hold the edges of your sandstone paver’s together makes for a stronger walkway, driveway, or patio. As the pavers move over time, if you don’t maintain your edges together, you’ll end up with unattractive gaps!
Use spacers during installation to ensure that your pavers are set evenly over the surface for the greatest results.
5- Allow time for it to settle.
If you’re not going to use a sealer, it’s a good idea to wait a few hours before driving or walking on your pavers. This will allow your new pavers to “settle” into place. If you used a sealer, though, it’s a good idea to wait at least 24 hours before walking or driving over your pavers just to be safe.
Sandstone pavers are more cost-effective in the long run than other materials. Aside from the financial benefits, their natural colors are also incredibly appealing! Remember to follow this fast and easy guide to help you install it. In no time, you’ll be able to completely enjoy your sandstone paved driveway, walkway, or patio!